Safety Helmet with Integrated Over Spectacles

Safety Helmet with Integrated over Spectacles

Safety Helmet with Integrated over Spectacles

The Premium safety helmet from Centurion safety helmets is with Integrated over Spectacles, which are approved to Grade B Medium Energy Impact within EN 166. The spectacles are with anti scratch and anti fog coating. It is a fully retractable eyewear with internal lockable position that accepts standard prescription spectacles underneath.

The helmet shell is produced out of ABS and approved to Lateral Deformation (LD) within EN 397 for added side impact protection.

Features

  • Largest front logo area available on any industrial safety helmets
  • Aqua Direct rain management system to direct the rain off the helmet
  • Wear and Care leaflet for Safety Helmets

All Centurion safety helmets are professionally designed, manufactured and tested to the highest standards. All helmets comply with the current European Standard (EN 397) for industrial safety helmets. A safety helmet can save your life; it should therefore be treated with the care and respect that any life saving aid deserves.

Storage

  • The helmet can be stored in its original transport cartons at storage temperature (0ºC to + 30ºC) in the dark, for up to 5 years from date of manufacture (without effecting the ‘in-use’ lifetime). Exceeding 5 years storage will reduce its in-use lifetime accordingly.
  • Storage in direct sunlight, extremes of temperature and in a fashion that is liable to distort the shell is not recommended. This will reduce the helmet lifetime.

Fitting

  • Every safety helmet should be adjusted so that it is a snug fit to each individual’s head.
  • A too tightly fitting helmet will cause discomfort to the wearer, whereas one that fits too loosely may not provide adequate protection in the event of an accident occurring.

Marking

The material used for the helmet shell has been specifically chosen for its shock absorption and impact properties and for its durability. It can, however, be sensitive to chemical attack. For this reason, it is recommended that helmets are not painted, should not be marked with felt tip pens and do not have decals or labels applied.

Cleaning

Should a safety helmet require cleaning, the company would advise that it is cleaned with warm soapy water and a soft cloth. Any helmet which does not come clean with this treatment should be replaced. Do not attempt to clean a helmet with solvents or abrasives.

Storage

The helmet can be stored in its original transport cartons at storage temperature (0ºC to + 30ºC) in the dark, for up to 5 years from date of manufacture (without effecting the ‘in-use’ lifetime). Exceeding 5 years storage will reduce its in-use lifetime accordingly.

Storage in direct sunlight, extremes of temperature and in a fashion that is liable to distort the shell is not recommended. This will reduce the helmet lifetime.

Author: SubEditor

Share This Post On

Leave a Reply

%d bloggers like this: